The Design of Creative Basketry Handicraft Products with Participation from in Bang Chao Cha Community, Ang Thong Province

การออกแบบผลิตภัณฑ์หัตถกรรมจักสานเชิงสร้างสรรค์แบบมีส่วนร่วม ชุมชนบางเจ้าฉ่า จังหวัดอ่างทอง

Authors

  • Wuttichai Withatanang Assistant Professor, Dr. Department of Industrial Product Design, Faculty of Industrial Technology, Valaya-Alongkorn Rajabhat University under The Royal Patronage.

Keywords:

handicraft, basketry, creative, participation, Bang Chao Cha community

Abstract

This research was a participative design of creative basketry handicraft products. The objectives of this study were 1) to investigate the model of basketry handicraft products, 2) to design creative models of creative basketry handicraft products, and 3) to disseminate the design of creative basketry handicraft products and measure satisfaction with the dissemination. The research used a community-based participatory action research. The research area was basketry community, Bang Chao Cha Village, Bang Chao Cha Sub-district, Pho Thong District, Ang Thong Province. The research characteristics were divided into two parts: qualitative research and quantitative research. The results of the research revealed that the current Bang Chao Cha community basketry handicraft products had distinctive characteristics and were valuable in many types of hand-made basketry patterns. Local natural materials were used to create the products. The basketry was delicate, refined, and beautiful. The patterns were exotic and were decorated with a variety of colors. The products had a functional character that was consistent with the modern way of life and retained the original local wisdom concept in creating them in harmony with the ideals and beliefs of the community in formulating creative ideas. The design results of 3 new creative basketry handicraft products included floor lamp products, table lamp products, and sitting products. Overall assessment result by experts was at a high level ( = 4.29, S.D. = 0.59). Regarding the dissemination of works to the public, it was found that people gained knowledge and understanding, had an impression of basketry, saw the value of basketry, created inspiration for further knowledge, and had a positive attitude towards basketry handicrafts. The overall assessment result was at a high level ( = 4.36, S.D. = 0.56). 

Downloads

Download data is not yet available.

References

Cherdchoo, W., Umasin, N., Tanaspansarrat, P., Chotimukta, Q., & Yoosuk, S. (2020). Tai-Yuan Ethnic Group: Conceptual Framework for Creation and Product Development. Mekong-Salween Civilization Studies Journal, 11(2), 200-222.

Kawkamsue, p. (2019). Conservation and Development of Traditional Wicker Handicrafts by Product Design Concept. Walailak Abode of Culture Journal, 19(2), 69-96.

Laoakka, S. (2018). Education knowledge and further wisdom in product development rattan woven machine with natural materials and renewable materials commercial to promote the creative economy in Isan. Journal of Fine and Applied Arts Khon Kaen University, 10(1), 171-192.

Leesuwan, V. (2010). Folk Handicrafts : Local Identity. Silpakorn University Journal, 30(1), 163-182.

Monphrom, R. & Tong-on, Y. (2017). Creating the Lacquerware from Thai – Vietnam. Journal of cultural approach, 18(34), 27-39.

Saribut, A. (2006). Designing Technology of Industrial Products. (pp. 10-12), Bangkok : Odeon Store.

Wanichakorn, A., Laedpriwan, S., Hongthong, I., & Chanvithee, K. (2019). The Project Development of New Furniture Design for Urban Lifestyle from The Wisdom of Basketry. Case Study of Bang Chao Cha, Pho Thong District, Ang Thong Province. Journal of Fine and Applied Arts Khon Kaen University, 11(1), 116-142.

Withatanang, W. (2015). Development On Standards Of Basketry Product For Export. VRU Research and Development Journal Science and Technology, 10(2), 67-83.

Withatanang, W. (2016). The study and development of Wicker handicraft products as souvenirs, decorations, household furnishings in PhraNakhon Si Ayutthaya. VRU Research and Development Journal Science and Technology, 11(3), 107-119.

Downloads

Published

2022-12-08

Issue

Vol. 13 No. 2 (2022): July - December

Section

บทความวิจัย (Research Article)

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.